ICS485HV - 10-Port RS485 Repeater Serial Communications Multiplexer with RS232 Converter Port

Multi-Port (10) 3KV Isolated RS485 Repeater Serial Communications Multiplexer with RS232 Converter Port.

• This auto transmit unit features 10 isolated(3KV) RS485 ports in 2 wire half-duplex communications mode, and 1 RS232 port.

• As a true  repeater, data received on any one port is transmitted to all other ports. Thus each port becomes the the start of an isolated and buffered "star configuration" branch, expanding the network while observing the RS485 loading rules.

• RS485 drivers allow 32 single unit loads at 4000 ft. and data rates up to 115.2 Kbps on each port.

• Galvanic Isolation of 3KV and robust transient suppressors help protect against destructive transients often found in industrial and outdoor environments

• Transparent to all asynchronous data, with any combination of data, parity, and stop bits at data rates up to 115.2Kbps. Contact factory for faster speed enhancements

• Fast auto turn-around, from transmit to receive mode, requires no software delays and eliminates timing problems and data collisions.

• Edge mounted LED Indicators for power and data on all ports.

• Efficient onboard polarity protected power regulators accepts supply voltages from 9 to 35 VDC, at 5 Watts max.

• Jumpers allow the RS485 bias and termination resistors, the RS485 Rx and Tx enables, and the RS232 DTE/DCE mode to be user configured. The 10 isolated RS485 ports can be reconfigured as several independent repeaters.

• The user connections are: 3 pin removable terminal strips(RS485), a 2 pin terminal strip/2.1 mm barrel connector(power), and an RJ11/12(RS232) .

• The RS232 converter port provides an interface to a computer or host controller. When used as a converter, this port transmits and receives serial data through all the isolated RS485 ports .

• Broad environmental range. Temperature: -40C to +85C(-40F to +185F). Humidity: 0 to 95% RH(non-condensing).

• Fourteen(14) easy mount through hole standoffs, which accept #6 hardware, are provided on the circuit board.

• Conformal Coating Available (Call us: 513-874-4796).

• Accessories available are a 12VDC Switching Power Supply(Wall Wart), and a 7ft DB9F to RJ11/12 RS232 cable.

• We also make similar isolated multi-repeaters in 5 Port(IBS485HV), and 7 Port(ICSX7HV) versions.

Click here for more information about the ICS485HV 10-Port Serial Communications Multiplexer!

 call: 513 874-4796